R.E.A
TSZ.co R.E.A protects roof floating tanks against arch created explosions .
Shell and roof bonding is mandatory due to API545 & NFPA780 standards .
304 or 316 stainless steel body depending on your order .
included bonding conductor is a tin coated flexible braided copper .
cold or warm permit installation , to avoid explosion in flammable situations (EX)
Best replacement for old & out dated bypass conductors .
Atex certified design No.Atex4743 X ECM 21 from ECM italy .
Tested according to : EN1127-1 ، EN60079-0 ، EN80079-36 ، EN80070-37 standards .
Product marking : EX II 2G Ex h IIC T4 Gb
Bonding conductor dimensions : 40x3mm
Suited for tanks with up to 20m height .
Operating temperature : -20 t0 +80 .
Device resistance in 20m height : 0.03Ω
Descriptions
There are 15 to 20 known Floating Roof Tank (FRT) fires per year. Floating Roof Tanks are especially vulnerable to the direct and indirect effects of lightning. Direct, or a nearby lightning strike can cause electrical current to flow across the tank shell and roof. When these lightning currents arc across the roof/shell interface, they can ignite any flammable vaporous present with devastating effect .
Many genius ways have been discovered to prevent these damages , such as shunts or bypass conductor boding , according to api reports shunts could be a sparkler when theyre not sunken , ladder & wire shaped bypass conductors have high impedance , sunken shunts are not capable of monthly maintenance , so the best way is metal bypass conductors also known as R.E.A,s manufactured by TSZ.co .
Downloads
Related products
-
Indra 60 (iranian lightning arrester)
-
Conductive Concrete (MLO3)
-
Brass Connector (Split Bolt)
-
Green plastic compound (GPC)
-
Bonding Jumper Cable tray
-
Multi clamp
-
Polypropylene clip (ncc)
-
4way tape to rod clamp
-
Tape To Wire Test Clamp
-
Tape to wall clamp
-
Tape To Tape Test Clamp
-
Tape to tape cross clamp
-
4Way wire clamp
-
Wire to Wire test clamp
-
Wire to structure clamp
-
Flexible braided copper conductor